Radio Shack ET-908 - Manual (Page 7)

7
MOUNTING THE BASE
ON A WALL
Using the supplied mounting bracket,
you can mount the ET-908’s base on a
phone jack wall plate or directly on the
wall.
To prepare the bracket for mounting,
twist off the tabs attached to the center
of the bracket and press them securely
into the holes on the narrow end of the
bracket.
Mounting on a Wall Plate
1. Press the ET-908’s AC cord under
the recessed clip directly below it
on the bottom of the phone.
2. Plug one end of the supplied short
modular cord into the TO TEL LINE
jack, then press the cord under
the other recessed clip on the bot-
tom of the phone.
3. Insert the tabs on the supplied
mounting bracket into the slots on
the bottom of the base. Then
press the bracket down until it
snaps into place.
TO TEL. LINE
43-1083.fm Page 7 Tuesday, August 17, 1999 2:17 PM