beautypg.com

Before you play, Getting ready to play, Connecting the pedal cord – Roland HP-203 User Manual

Page 18: Connecting the power cord, Connector (p. 16), Connect the included power cord here (p. 16)

background image

16

Before You Play

Plug the pedal cord extending from the stand into the Pedal
connector located at the back of the HP203’s bottom panel.

fig.PedalCord.eps

1.

Make sure that the [Power] switch located at
the left side of the front panel is off (in the
upward position).

fig.PowerOff-e.eps

2.

Turn the [Volume] knob all the way toward the
left to minimize the volume.

3.

Connect the included power cord to the AC
INLET located at the rear of the bottom panel.

4.

Plug the other end of the power cord into an
AC outlet.

fig.PowerCord.eps

You must use the power cord included with the
HP203.

Getting Ready to Play

Connecting the Pedal Cord

Connecting the Power Cord

OFF

Upward

position

3

4

NOTE

HP203_e.book 16 ページ ２００６年１２月８日　金曜日　午前９時３３分

See also other documents in the category Roland The input devices: