Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller ID - Manual (Page 24)

24 Caller ID Operation (Handset Only)
ˆ
Caller ID Operation (Handset Only)
If you subscribe to Caller ID service from
your phone company, the phone company
sends information about the call, as well as
the time and date, between the first and sec-
ond rings of every call you receive. Although
the Caller ID memory is on the handset, it
also records the call you receive on the
speakerphone.
The phone displays this information when it
receives a call, and it stores up to 80 Caller
ID records — 40 each for both lines — for lat-
er review. It also shows if caller information is
unavailable or if the name and number were
blocked by the caller (see “Caller ID Messag-
es”).
If you subscribe to Call Waiting with Caller
ID, you will hear a tone through the handset
when a call comes in, then the Caller ID
record appears. If you want to answer the in-
coming call, press
FLASH . To resume the
previous phone conversation, press FLASH
again.
If the phone’s Caller ID memory becomes
full, any new call replaces the oldest call’s
record.
REVIEWING CALLER ID
RECORDS
To review the Caller ID records, lift the hand-
set if necessary and press
CID / HOLD . Num-
bers of new and total numbers of Caller ID
records for each line appear. Press
∗∗∗∗
/ TONE /
6 6 6 6
or # /
7 7 7 7
to select the line you want to view,
then press
8 8 8 8
/ INTCM or CONF /
9 9 9 9
.
Note: If the handset is faceup on the base, it
shows the number of Caller ID records, so
you can see if you have new records to re-
view.
Repeatedly press CONF /
9 9 9 9
to scroll through
the Caller ID records from the newest to the
oldest, or
8 8 8 8
/ INTCM to scroll back through
the records. To scroll quickly through the
records, hold down
CONF /
9 9 9 9
or
8 8 8 8
/ INTCM .
The top line of each record shows the date,
time and the number of calls from that num-
ber. The second line shows the caller’s
name, and the third line shows the caller’s
phone number.
To exit the Caller ID record display, press
CID / HOLD .
CALLER ID MESSAGES
Display Description
B_d[э'э B_d[э'э B_d[э'э B_d[э'э B_d[ý( B_d[ý( B_d[ý( B_d[ý(
D;M D;M D;M D;M NNý NNý NNý NNý NN NN NN NN
JJB JJB JJB JJB NNý NNý NNý NNý NN NN NN NN
Shows the number of
new Caller ID records
(records you have not
reviewed) and the total
number of records for
each line.
Fh_lWj[ Fh_lWj[ Fh_lWj[ Fh_lWj[ DWc[ DWc[ DWc[ DWc[
or
Fh_lWj[ Fh_lWj[ Fh_lWj[ Fh_lWj[ DkcX[h DkcX[h DkcX[h DkcX[h
The caller has blocked
the Caller ID information
from being sent.
Kdademd Kdademd Kdademd Kdademd DWc[ DWc[ DWc[ DWc[
or
Kdademd Kdademd Kdademd Kdademd DkcX[h DkcX[h DkcX[h DkcX[h
The caller is not within a
caller ID service area.
?dYecfb[j[ ?dYecfb[j[ ?dYecfb[j[ ?dYecfb[j[ :WjW :WjW :WjW :WjW
Appears if there was an
error during the transmis-
sion of Caller ID informa-
tion. Minor electrical
disturbances can affect
Caller ID information.
Occasional errors are
normal. If the phone fre-
quently displays
?dYec# ?dYec# ?dYec# ?dYec#
fb[j[ fb[j[ fb[j[ fb[j[ ZWjW ZWjW ZWjW ZWjW
, contact your
local phone company or
RadioShack store for
assistance.