Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller ID - Manual (Page 19)

19 Basic Operation
USING THE PHONE WITH
EXTENSION PHONES
The phone detects when an extension phone
is in use. The corresponding line indicator
flashes on the base and
?d ?d?d ?d Ki[ Ki[ Ki[ Ki[
flashes on the
handset’s display along with
B_d[ B_d[ B_d[ B_d[ ''''
or
B_d[ B_d[ B_d[ B_d[ ((((
.
To join the conversation from the handset or
base, press the line button for the line in use.
While the busy tone is sounding, press the
line button again.
Note: If you hang up the phone and some-
one is still on that line on an extension, the
phone’s line indicator(s) might not stay lit.
USING REDIAL
You can quickly dial any of the last three
numbers dialed on the handset using either
line 1 or line 2. Repeatedly press
REDIAL /
PAUSE on the handset until the number de-
sired appears, then press LINE 1 or LINE 2 .
To dial the last number dialed on the base,
press
LINE 1 or LINE 2 on the base then RE-
DIAL / PAUSE .
Notes:
• Each keypad has a separate redial
memory. You cannot redial a number
you dialed on one keypad using the
redial key on the other.
• You can redial the number you originally
dialed on Line 1 using Line 2, as long as
you use the same keypad as previous.
• The redial memory holds up to 32 digits,
so you can redial long distance as well
as local numbers.
USING FLASH
FLASH performs the electronic equivalent of
a switchhook operation for special services,
such as Call Waiting.
For example, if you have Call Waiting, press
FLASH to answer an incoming call without
disconnecting the current call. Press FLASH
again to return to the first call.
Note: If you do not have any special servic-
es, pressing
FLASH might disconnect the
current call.
USING TONE SERVICES ON
A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these special
tone services by following these steps.
Dial the service’s main number. When the
service answers, press
∗∗∗∗
/ TONE /
6 6 6 6
. Any ad-
ditional numbers you dial are sent as tone
signals.
When you hang up, the phone automatically
resets to pulse dialing.
USING THE PAGING/
INTERCOM FEATURES
You can use the phone as a two-way pager
and intercom between the base and the
handset. This is useful if the handset is away
from the base and you want to locate it, or if
you want to have a conversation between
the handset and the base.
To page the handset from the base, press IN-
TERCOM . The handset and base ring, and
FW]_d] FW]_d] FW]_d] FW]_d]
appears on the handset’s display.
Press
8 8 8 8
/ INTCM on the handset to answer
the page.
?dj[hYec ?dj[hYec ?dj[hYec ?dj[hYec
appears.
To page the base from the handset, press
8 8 8 8
/ INTCM . The base and handset ring, and
FW]_d] FW]_d] FW]_d] FW]_d] 8Wi[ 8Wi[ 8Wi[ 8Wi[
appears on the handset’s dis-
play. Press INTERCOM on the base to an-
swer the page.
?dj[hYec ?dj[hYec ?dj[hYec ?dj[hYec
appears on the
handset’s display.