RCA Pro848 - Manual (Page 51)

49
Care and Maintenance
• Do not operate the camcorder near the
ocean as salt water or salt water spray
may damage the internal parts of the
camcorder.
• Do not operate the camcorder for
extended periods in temperatures below
40°F (4C) or above 95°F (35C).
• Do not expose the camcorder or adapter
to rain or moisture. If either component
becomes wet, turn off the power and
take the unit to an Authorized RCA
Camcorder Servicenter.
• Do not use an adapter, adapter/charger,
or batteries other than the ones
specified for the camcorder. Use of the
wrong accessories may cause damage
to the camcorder.
• The camcorder can be damaged by
improper storage or handling. Do not
subject the camcorder to swinging,
shaking, or dropping.
• Do not store the camcorder in
temperatures below -22°F (-30C) or
above 149°F (65C).
• When the camcorder is not in use,
always remove the cassette and
AC adapter or battery.
• Retain the original carton for future
storage or shipping purposes.
Proper Care and Storage
• Keep dust and grit from entering the
camcorder’s cassette door. Dust and
grit are abrasive and will cause
excessive wear to both the camcorder’s
recording/playback heads and cassettes.
• Always replace the lens cap when the
camcorder is not in use.
• Before handling your camcorder, make
sure your hands and face are free from
any chemical products such as suntan
lotion, as it may damage the finish.
Things to Avoid
• Do not attempt to disassemble your
camcorder. There are no user-
serviceable parts inside.
• Avoid operating your camcorder
immediately after moving it from a cold
location to a warm location. Give the
camcorder 1-1/2 to 2 hours to reach a
stable temperature before inserting a
cassette. When the camcorder is
moved from cold to warm,
condensation may cause the tape to
stick to the headwheel and damage the
headwheel or tape.
• Do not aim your camcorder at the sun
or other bright objects.
• Do not leave your camcorder in direct
sunlight for extended periods of time.
The resulting heat buildup could
permanently damage the camcorder’s
internal parts.
• Do not operate the camcorder in
extremely humid environments.