RCA VG4251 - Manual (Page 24)

VCR MAIN MENU
1 Timer Recordings
22
Recording a Program
Checking or Clearing Timer Recordings
1. Press MENU on remote to display VCR
MAIN MENU
on TV screen.
2. Press 1 to display the TIMER
RECORDINGS
menu.
3. Press 2 for Review Existing Progs.
feature.
4. Press MENU to display information for
the next program.
5. Press CLEAR when the program you
want to erase appears on the screen.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the
AUDIO
and VIDEO IN jacks of the VCR. Recording
from the line input is convenient if you have a
satellite receiver or similar component attached to
these jacks. To timer record from the component
connected to the VCR’s line input:
Press INPUT (or 0,0) to select VIDEO in place of
the channel number on the TV screen during
timer programming.
Program 1 (One time)
Channel VIDEO
Start time --:-- --
End time --:--
Start date --/--/--
Tape speed SLP
Press CLEAR to correct
Press MENU to exit
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
Program 1 (One time)
Channel 08
Start time 02:10 PM
End time 03:35 PM
Start date 11/18/96 Mon
Tape speed SLP
Press CLEAR to erase
Press MENU for next prog
Recording While You’re Away