RCA VG4251 - Manual (Page 22)

20
Recording a Program
One Touch Recording
One touch recording lets you record up to four hours without using the timer program feature. The VCR
will turn off automatically at the end of the recording.
POWER CHANNEL STOP • EJECT
TRACKING
RECORD REW PLAY • PAUSE FWD
VCR
SLP REC
RECORD Display showing 30
minutes remaining for one
touch recording.
Stopping a Recording in Progress
Press and hold STOP on the remote or STOP•EJECT
on the VCR for approximately three seconds.
Each press increases the time — 30 minutes up to four
hours.
The amount of time the VCR will record and REC will
appear in the VCR’s display panel.
You can increase the amount of recording time by
pressing REC or RECORD.
REC Ch 11
Record Length 0:30
Press REC to set length
One Touch Display on
TV Screen
Operating Instructions
1. Turn on the VCR.
2. Insert a tape with safety tab in place.
3. Select the channel you want to record.
4. Select the desired recording speed using SPEED on
the remote.
5. Press REC on the remote or RECORD on the VCR
twice to activate one touch recording.
6 . Press REC or RECORD repeatedly until the amount of
recording time for the program is displayed in the
VCR’s display panel or on the TV screen.
Press Recording
RECORD Time
0:30 ( 30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
(Normal Recording)