RCA VG4251 - Manual (Page 14)

12
Playing a Tape
Operating Instructions
To Play a Tape
1 . Turn on the TV and tune it to channel 3, 4, or TV’s video input
to see the picture from the VCR.
2 . Insert a tape in the VCR.
VCR automatically turns on. The cassette-in indicator
lights, and the VCR indicator lights if the Auto TV/VCR feature
is set to ON. The tape automatically begins playback if the
safety tab on the cassette has been removed and the Auto Play
feature is turned on.
3 . Press PLAY on the remote or PLAY•PAUSE on the VCR, if
necessary. PLAY appears in the VCR’s display panel.
4 . Press TRACKING up or down to remove any streaks from the
picture, if necessary. Details are on page 14.
5 . Press STOP on the remote or STOP•EJECT on the VCR.
6 . Press REW. REW will appear in the VCR’s display panel.
The VCR will automatically rewind the tape if it reaches the
end of the tape during playback. While rewinding, you can
press POWER and the VCR will turn off after rewinding.
7 . Press STOP•EJECT on the VCR to eject the tape once it is
completely rewound.
POWER CHANNEL STOP • EJECT
TRACKING
RECORD REW PLAY • PAUSE FWD
Safety Tab