RCA B27TF680 - Manual (Page 15)

Chapter 1 13
Connections & Setup
TV/VCR/DVD + Receiver
1A. Connect the Dolby Digital or DTS receiver to the TV/VCR/DVD
If you have a Dolby Digital or DTS receiver with a Digital Input jack, connect an optical
digital cable (not provided) into the OPTICAL DIGITAL OUT jack on the TV/VCR/DVD
player and to the Digital Input jack on the back of the receiver. You must also set the
digital output setting in the DVD setup menu (Chapter 5 has details). Also, check the
audio within the DVD Options menu to make sure it is set up correctly (Chapter 4 has
details).
Note: The illustration on the left shows a digital optical cable connection. If your receiver has a
coaxial Audio In jack, use a shielded (coaxial) video or audio cable with RCA plugs at both ends to
connect the coaxial digital jacks on the TV/VCR/DVD and the A/V receiver.
or
1B. Connect the A/V receiver to the TV/VCR/DVD
Connect the A/V cables to an A/V (audio/video) receiver. Connect audio cables to the
TV/VCR/DVD’s LINE OUT AUDIO (L and R) jacks and the other ends to the receiver’s
corresponding Audio Input jacks.
Go to page 14