Radio Shack ET-548 User Manual

Page 14

MEMORY DIALING

You can store up to 10 numbers of up to
16 digits.

Notes:

• To keep your accounts secure, we

recommend you do not store your
personal access code for services
such as bank-by-phone in a memory
location.

• When storing numbers for special

services (such as alternate long dis-
tance or bank-by-phone), store the
service’s main phone number in one
memory location and numbers for ad-
ditional information in other locations.

Storing a Number in Memory

1. With the TALK/LOW BATT. indicator

off, press

MEMORY

Note: If you do not press any button
on the keypad within about 10 sec-
onds, a buzz sounds and the phone

exits the number storing process.
Start again from Step 1.

2. Dial the number you want to store.

3. Press

MEMORY

again.

4. Press the memory location number

(0–9) where you want to store the
number. A long beep sounds, and the
phone number is stored in memory.

5. Pull out the memory index card at the

bottom of the base and write the
stored number next to the memory
location number. We recommend you
use a pencil in case you want to
change it later.

Notes:

• If you receive a call while you are

storing a number in memory, press

TALK/HANG UP

to answer the call. Af-

ter the call, begin again at Step 1.

Illustration

43-1048.fm Page 14 Tuesday, August 17, 1999 12:45 PM