Radio Shack ET-927 - Manual (Page 17)

17
Dialing a Stored Number
To dial a stored number, when you hear
the dial tone, press
MEM then the de-
sired memory location number ( 01 – 20 ).
Chain Dialing Service Numbers
You can make a call using more than
one of the ET-927’s memory locations.
This is called chain dialing. Chain dialing
is useful for dialing special services such
as alternate long distance or bank-by-
phone.
When calling special services, dial the
service’s main number first. Then, at the
appropriate place in the call, press
MEM
and the number for the memory location
where the additional information is
stored.
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire depart-
ment, ambulance) and you want to test
the stored number, make the test call
during the late evening or early morning
hours to avoid peak demand periods. Al-
so, remain on the line to explain the rea-
son for your call.
USING THE INTERCOM
You can use the ET-927 as a two-way
pager and intercom between the base
and the handset. This is useful if the
handset is away from the base and you
want to locate it, or if you want to have a
conversation between someone with the
handset and someone at the base.
Notes:
• If a call comes in during an intercom
conversation, the person using the
handset can answer the call, but the
intercom call is disconnected.
• If the handset is in use when it
receives a page, the person using
the handset hears one quiet ring
over the phone.
Paging from the Base to the
Handset
To send a page from the base to the
handset, press
PAGE on the base. The
handset beeps twice per second for 15
seconds. The base’s PAGE indicator
flashes while the handset beeps.
illus -- add callout to
PAGE indicator
43-1097a.fm Page 17 Tuesday, August 31, 1999 10:01 PM