Radio Shack ET-927 - Manual (Page 15)

15
USING MUTE
The MUTE button on the handset lets
you talk to someone else in the room
without the person on the other end of
the phone line hearing your conversa-
tion. Press
MUTE during the call. The
BATT LOW indicator on the handset
lights steadily.
Press MUTE again to resume your
phone conversation. The BATT LOW in-
dicator turns off.
USING FLASH
You can use FLASH on the handset to
produce a switchhook signal for special
phone services, such as Call Waiting. If
you have Call Waiting, press
FLASH to
take an incoming call without discon-
necting the current call. Press
FLASH
again to return to the first call.
Note: If you do not have any special
phone services, pressing
FLASH might
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these services.
With T/P set to P , just press when
you want to begin sending tones. Any
additional numbers you dial are sent as
tone signals. When you hang up, the
phone automatically resets to the pulse
mode.
Illus
illus -- make sure all
button labels are visible
illus
43-1097a.fm Page 15 Tuesday, August 31, 1999 10:01 PM