Frequently asked questions, Beyond the basics, My scanner is on but will not scan, why – Radio Shack PRO-528 User Manual

Page 80: Why won’t my scanner work at all

Beyond the Basics

frequently asked
questions

These suggestions might help you locate
the problem.

My scanner is on but will not
scan, why?

• SQUELCH is not adjusted correctly;

adjust SQUELCH.

• Only one channel or no channels are

stored.

• Store frequencies into more than one

channel.

Why won’t my scanner work at
all?

• Check the batteries or make sure the

AC adapter or DC adapter is connected

properly.

• Recharge the rechargeable batteries or

replace the non-rechargeable batteries.

• The AC adapter or DC adapter is not

connected.

• Be sure the adapter’s barrel plug is

fully plugged into the 9V 300 mA jack.