Radio Shack PRO-528 - Manual (Page 23)

23
Beyond the Basics
2. Press E/PGM.
3. Press and hold E/PGM during program
mode. Scanner displays the copy/move
menu.
4. Press S or T to select the copy/move
function, then press E/PGM to decide
on copy or move.
5. Select the bank where you want to
copy or move the frequency. The
smallest empty channel number and
“000.0000” fl ashes on and off over the
frequency you want to store.
6. Press S or T to move to the channel
where you wish to store the frequency.
7. Press E/PGM to enter the frequency,
and return to the program mode. To
cancel the copy or move, press •/CLR
/DELAY. If there is no empty channel,
the scanner automatically selects the
fi rst channel of the bank.
searching for and temporarily
storing active frequencies
If you do not have a reference to
frequencies in your area, use a chain,
direct, or service search (except weather
search) to fi nd a transmission.