Radio Shack PRO-528 - Manual (Page 27)

27
Beyond the Basics
2. Press the bank number you want to
change the range. The lower frequency
range appears.
3. Using the number keys, enter the lower
limit frequency, and then press E/PGM.
4. Press S or T to change the frequency
to an upper limit frequency.
5. Using the number keys, enter the upper
limit frequency, and then press E/PGM.
6. When you fi nish programming
frequency ranges, press SRCH.
direct search
You can search up or down from the
currently displayed frequency using direct
search. SRCH appears during searching.
Press and hold SRCH when the frequency
you want to start from appears. Or, enter
the frequency you want to start from using
the number keys in search hold mode, then
press S or T.
Note: If you enter an invalid
frequency, the scanner displays Error.
Press •/CLR /DELAY.
service bank search
You can search for ham, marine, aircraft,
or police (fi re/emergency) transmissions
without knowing the specifi c frequencies
used in your area. The scanner is
Notes