RCA Pro942 - Manual (Page 7)

5
4. Attach the lens cap cord and
adjust the handstrap.
A. Remove the lens cap from the
camcorder.
B. Attach the lens cap cord to the
lens cap.
First-Time Operation
E. Put your hand in the handstrap.
F. Pull the adjustment strap to tighten
and close the strap.
G. Snap the cover shut.
H. Attach the lens cap to the handstrap.
5. Turn on the camcorder.
The CAM/OFF/VCR switch tells the
camcorder whether you want to record
(CAM), play back tapes (VCR), or turn
off the camcorder’s power (OFF).
Some of the controls operate
differently depending on the position
of the CAM/OFF/VCR switch.
• Press and hold the small button on
CAM/OFF/VCR while sliding it to
CAM or VCR.
Important Note: The TAPE indicator
will flash in the viewfinder when there is
moisture in the camcorder. Remove the
tape and wait an hour before inserting the
tape in the camcorder again.
DC IN
6V
OPEN
T
W INST. ZOOM
FOCUS
DATE/TITLE
DISPLAY
PLAY
F.F. EDIT
SEARCH
STOP
REW
F
N
16X9
FADE
EIS
Thumb Trigger
Handstrap
Handstrap Cover
Lens Cap
Attach Lens
Cap Here
CAM/OFF/VCR Switch
(continued on next page)
Lens Cap
Lens Cap Cord
C. Unsnap the handstrap cover and
open the adjustment strap.
Lens
Cap
Lens Cap
Cord
Adjustment
Strap
Handstrap
Cover
D. Put the lens cap cord over the
adjustment strap.