RCA 27993 - Manual (Page 23)

23
C
HANGING A
S
TORED
N
UMBER
Use the same procedure to change a stored number as you do to store a
number—you’re just replacing the phone number with a different one.
D
IALING A
S
TORED
N
UMBER
1. Make sure the phone is ON by pressing the TALK/callback button.
2. Press the mem button.
3. Press the number (0-9) for the desired memory location. The number
dials automatically.
OR
1. Make sure the phone is OFF (not in TALK mode).
2. Press the mem button.
3. Use the CID (up and down arrow) button to scroll through the numbers
stored in memory until the desired number is shown.
4. Press TALK/callback. The number dials automatically.
IMPORTANT: If you make test calls to emergency numbers stored in memory,
remain on the line and briefly explain the reason for the call to the dispatcher.
Also, it’s a good idea to make these calls in off-peak hours, such as early
morning or late evening.
C
HAIN
D
IALING FROM
M
EMORY
Use this feature to make calls which require a sequence of numbers such as
using a calling card for a frequently called long distance number. You dial
each part of the sequence from memory. The following example shows how
you can use chain dialing to make a call through a long distance service:
The Number For Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9