RCA 27993 - Manual (Page 22)

22
M
EMORY
Store up to ten 24-digit numbers in memory for quick dialing. This memory
feature is in addition to the 40 Caller ID records that can be stored in memory.
S
TORING A
N
AME AND
N
UMBER IN
M
EMORY
1. Press the mem button.
2. Press the desired memory location button (0 through 9 keys). If the
memory location is occupied, the memory location and stored name
and number appear on the screen. If the memory location is empty,
EMPTY appears in the display.
3. Press the mem button again. The display shows ENTER NAME.
4. Use the handset number keypad to enter a name (up to 15 characters).
More than one letter is stored in each of the number keys. For example,
to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key
3 times for the letter I. Press the 5 key 3 times for the letter L, then press
the 5 key 3 times for the second letter L, and press the 1 key to insert a
space between the first and last name. Press the 7 key 4 times for the
letter S; press the 6 key once for the letter M; press the 4 key 3 times for
the letter I; press the 8 key for the letter T; press the 4 key twice for the
letter H.
5. Press the mem button again to save your selection. The display shows
ENTER TEL NUMBR.
6. Use the handset number keypad to enter the area code followed by the
telephone number (up to 24 digits, including pauses) and press the mem
button again to save your selection. The unit beeps to confirm.
7. To enter another name and number in a different memory location,
return to step 1 and repeat the process.