RCA 27993 User Manual
Page 15
15
S
ETTING
THE
D
ISPLAY
L
ANGUAGE
1. Press the flash/program button until
1ENGLISH 2FRA 3ESP shows in
the display.
2. Use the CID (up or down arrow) button or the handset number pad to
enter your selection.
3. Press flash/program to confirm.
S
ETTING
THE
L
OCAL
A
REA
C
ODE
1. Press the flash/program button until
SET AREA CODE shows in the display.
2. Use the number pad to enter the area code.
3. Press flash/program to confirm and exit setup.
NOTE:
If you find it necessary to dial all local calls with the area codes
included, press and release flash/program, until SET AREA CODE is displayed.
Then enter "000." Press flash/program again to confirm.
S
ETTING
THE
R
INGER
T
ONE
1. Press the flash/program button until
SET RINGER TONE shows in the display.
2. Use the CID review (up or down arrow) button or the handset number pad
to enter your selection.
3. Press flash/program to confirm.