Ricoh Aficio MP 6000 - Manual (Page 60)

System Settings
50
2
❖ DNS Configuration
Make settings for the DNS server.
When you select [Specify], enter the [DNS Server 1] - [DNS Server 3] IP address
as “xxx.xxx.xxx.xxx”(“x” indicates a number).
The default setting is Auto-Obtain (DHCP).
❖ DDNS Configuration
You can specify the DDNS settings.
The default setting is Active.
❖ Domain Name
You can specify the domain name.
The default setting is Auto-Obtain (DHCP).
Enter the domain name using not more than 63 single-byte alphanumeric
characters.
❖ WINS Configuration
You can specify the WINS server settings.
I f [ O n ] i s s e l e c t e d , e n t e r t h e W I N S S e r v e r I P v 4 a d d r e s s a s
“xxx.xxx.xxx.xxx”(“x” indicates a number).
If DHCP is in use, specify the [Scope ID].
Enter a [Scope ID] using up to 31 alphanumeric characters.
The default setting is Off.
❖ Effective Protocol
Select the protocol to use in the network.
The default setting for “IPv4” is Active.
The default setting for “IPv6” is Inactive.
The default setting for “NetWare” is Active.
The default setting for “SMB” is Active.
The default setting for “AppleTalk” is Active.
❖ NCP Delivery Protocol
Select the protocol for NCP delivery.
The default setting is TCP / IP Priority.
❖ NW Frame Type
Select the frame type when you use NetWare.
The default setting is Auto Select.
❖ SMB Computer Name
Specify the SMB computer name.
Enter the computer name using up to 15 alphanumerical characters.
"*+,/:; <>=?[\]|. cannot be entered.
Setting a computer name starting with RNP and rnp is inhibited.
Use uppercase letters for alphabet.