RCA 2-9680 User Manual

Page 13

Dial tone is OK, but

• Make sure the TONE/PULSE switch on the base is

can’t dial out

correctly set (see page 3).

Handset does not ring

• Make sure the RINGER switch on the handset is

turned to ON.

• You may have too many extension phones on your

line. Try unplugging some phones.

• See solutions for “No dial tone.”

You experience static,

• Change channels

noise, or fading in

• Is handset out of range? Move closer to the base.

and out

• Does the base need to be relocated?
• Charge battery.
• Make sure base is not plugged into an outlet with

another household appliance.

Unit beeps

• Place handset in base for 20 seconds to reset the

security code. If that doesn’t work, charge battery for
12 hours.

• Clean charging contacts on handset and base with a

soft cloth, or an eraser.

• See solutions for “No dial tone.”
• Replace battery.

Memory Dialing

• Did you program the memory location keys correctly?

See page 6.

• Did you follow proper dialing sequence? See pp. 6-7.
• Make sure TONE/PULSE switch is correctly set.

See p. 3.

• Did you reprogram numbers into memory after power

outage or replacing battery?

Problem

Solution