RCA RC940 - Manual (Page 11)

11
English
Static/
Interference
Move base and/or extension (halogen lamps, light dimmers,
and computer surge protectors can cause some static)
Can't dial out Decrease distance between units. If problems continue call
customer service.
Does not ring Decrease distance between units. If problems continue call
customer service.
Important Notes on Operation
• Do not plug equipment into a surge protector, plug strip, AC
extension devices or GFCI-protected outlets. Doing so can negatively
affect performance.
• Equipment will not operate during a power outage. Use a hardwired
phone during a power outage.
• Equipment can only be used for a single phone line.
• If you cannot get a dial tone, refer to the Troubleshooting section.
• Follow all directions in the order presented. If you experience trouble,
restart the installation process from the beginning of the Installation
section.
Things You Should Know
The following list of situations is provided to inform you of things that
you may encounter when using the system. It is intended to help you get
the best performance possible.
Power Outages
Only the telephone plugged into the base unit operates.
Two-Line Phone Operations
If two lines are being used, only one line can operate through the
Wireless Modem Jack System. A single base and extension hook-up will
only operate the phone line to which the base is connected.
Ground Fault Circuits
It is recommended that the Wireless Modem Jack System not be set up
or operated using GFI circuitry (e.g. bathrooms, outdoor use, etc.)