Radio Shack PRO-99 User Manual
Page 57
57
C
HANGING
THE
D
ISPLAY
C
ONTRAST
1. Press and hold
FUNC
for
about 2 seconds. The menu
screen appears.
2. Press
8
and then
3
to select
3:LCD Contrast
.
3. Press
<
or
>
to select
LCD contrast
. Then press
ENT
to set the display contrast.
U
SING
C
LONE
M
ODE
You can transfer the contents of
the scanner’s memory to and from
another PRO-99 scanner using an
optional connecting cable with
1
/
8
-inch (3.5 mm) phone plugs on
both ends (use RadioShack part
number 42-2420 available at your
local RadioShack store).
Or, you can program your scanner
using data you transfer from your
personal computer to the scanner
using an optional PC application
software.
Cloning Data from
Another PRO-99
1. Turn on both scanners.
2. Connect the connecting cable
to each scanner's
PC/IF
jack.
** CLONE MODE **
Press UP to send
Remove cable to exit.
appears
in the scanner's display.
3. Press
^
.
Confirm send data?
1 -> YES
Press other key for NO.
appears
in the scanner's display.
Ô
NOTES
Ô
Incorrect Model!
appears
if the scanner receives
data from another
scanner other than a
PRO-99.
20-515Change01_04.fm Page 57 Friday, January 16, 2004 1:14 PM