Radio Shack PRO-99 - Manual (Page 39)

39
channel, press FUNC and
then 4 / CTCSS . CT00:SRCH
appears. When the scanner
detects the quiet code while
receiving a transmission, the
detected code flashes on the
bottom line.
If you want to enter the
detected code into the car
number or the channel, press
ENT while the code flashes.
Using CTCSS During a
Search
You can find the quiet code on
frequencies during a search
(except SR1 and SR4). While
searching through a band, press
FUNC then 4 / CTCSS . CT00:SRCH
appears. When the scanner finds
a frequency with a quiet code, the
quiet code frequency flashes.
To turn off the CTCSS feature,
press
FUNC then 4 / CTCSS again.
SEARCHING AND
TUNING
F
INDING AND
S
TORING
A
CTIVE
F
REQUENCIES
You can search for transmissions
using the scanner's
preprogrammed search banks.
The search banks include six
preprogrammed search ranges,
SR0 to SR5. You can change the
search range of Bank SR6
manually by setting the lower and
higher ends of the search
range.
Ф
Ф NOTES Ô
• You can use the
scanner's delay
feature while
searching the search
bank. See “Delay” on
Page 50.
• You can set CTCSS
when searching any
search range, except
for SR1 and SR4.
The scanner will
display detected
CTCSS codes
depending on the
CTCSS setting. See
“USING CTCSS” on
Page 36.
• The scanner does
not search locked-out
frequencies while
searching ranges.
See “Locking Out
Channels or
Frequencies” on
Page 51.
20-515Change01_04.fm Page 39 Friday, January 16, 2004 1:14 PM