Radio Shack PRO-99 - Manual (Page 52)

52
You can still manually select and
monitor a locked-out car number
frequency.
To remove the lockout from a car
number frequency:
1. Enter the car number All
Frequency mode.
2. Repeatedly press FUNC then
SCAN to select locked-out car
number frequency.
3. Press FUNC then 3/L/OUT .
Locking Out Channels
To lock out a channel while
scanning, press
FUNC and then
3/L/OUT when the scanner stops
on the channel.
To lock out a channel manually,
select the channel and then press
FUNC , 3/L/OUT so L appears in the
display.
You can still manually select and
monitor locked-out channels.
To remove the lockout from a
channel, manually select the
channel and press
FUNC and then
3/L/OUT so L disappears.
Reviewing the Lock-Out
Channels
To review all locked out channels,
press and hold
FUNC for about 2
seconds and then press 7 and 1 .
Repeatedly press ^ or v to
advance to the next locked out
channel.
Ф
Ф
NOTES
Ô
If you want to remove the
lockout from a channel,
simply press
3/L/OUT
to remove the lockout.
20-515Change01_04.fm Page 52 Friday, January 16, 2004 1:14 PM