Radio Shack PRO-99 - Manual (Page 25)

25
and frequency are stored in
an available channel.
To program another
frequency in the same car
number, press ^ or
v to recall
0.00000 MHz then repeat
Step 3.
When you finish
programming, press
CAR
twice.
Adding Frequencies To a
Car Number
1. Select the car number that
you want to add the frequency
by using
CAR and the number
keys.
2. Press FUNC then v . P.Fr and
0.00000 MHz appears.
3. Enter the frequency (including
the decimal point) you want to
associate with the displayed
car number by using the
number keys and ./
CLEAR .
4. Press ENT to store the
frequency. The frequency is
associated with the car
number entered.
Adding a Car Number to
the Channel
You can assign the car number
after you program the frequency
into the channel.
Ô
1. Enter the normal car number
operation mode.
2. Press FUNC , and then ^ to
recall the frequency without
car number. The scanner
shows
C.Fr (Call Frequency)
Ô
NOTES
Ô
When the scanner is not
programmed with
frequencies without the
car number, the scanner
sound an error tone.
20-515Change01_04.fm Page 25 Friday, January 16, 2004 1:14 PM