Radio Shack PRO-99 - Manual (Page 31)

31
press ./ CLEAR and enter the
correct frequency. If the dual
entry is intentional, press
ENT
to accept.
5. By default, the scanner will
configure the channels you
enter for a two second delay
after a transmission is
received. This is indicated by
D appearing in the top row of
the display. If you do not want
the scanner to pause for reply
traffic before resuming
scanning operation, press
FUNC then 2/DLY until D is not
visible in the top line of the
display.
S
TORING
T
EXT
T
AGS
You can customize your scanner
by storing text tags (up to 16
characters) for easy identification
of channel transmissions.
1. Select channel using SCAN ,
^, and v.
2. Press <. The scanner enters
the text input mode. If you
want to cancel the operation,
press
FUNC .
3. Enter the text using the
number keys. (see “Text Input
Chart” on Page 32).
If you make a mistake, press
< or > to move to the
character you want to change.
For example, to identify
amateur (ham) radio
transmissions in the 6 meter
range, input "
HAM 6m " as
follows:
20-515Change01_04.fm Page 31 Friday, January 16, 2004 1:14 PM