Roland RE-20 - Manual (Page 4)

4
Panel Descriptions
POWER Indicator
This indicator shows whether the power is on or off, and also functions as a battery-check indicator.
* When the indicator starts to dim or fails to light, the batteries are exhausted. When this occurs, install
new batteries. For instructions on replacing the batteries, refer to “Installing Batteries” (p. 6).
EFFECT ON/OFF Indicator
This lights up when the effect is on.
TAP Indicator
This flashes in time with the delay
time set by the tap input.
* The light is turned off when the twist
effect is applied.
TAP Pedal
You can set the delay time (tap
delay time) by briefly depressing
this pedal at the desired tempo (tap
input). Also, you can obtain the
“twist” effect by keeping the pedal
depressed (p. 14).
* The maximum values that can be set
for the tap delay time in Normal/
Long mode and Variation mode
differ (p. 18).
Virtual Tape Display
The movement of the light provides a visual
image resembling a running tape.
The movement of the light is synchronized to
the virtual tape speed.
EFFECT ON/OFF Pedal
This alternately switches the effect on
or off each time the pedal is pressed.
Even when the effect is switched off,
the echo sounds still fade gradually.
* Turning up the INTENSITY knob
causes the echo sounds to continue.
RE-20_e.book 4 ページ ２００７年６月８日 金曜日 午後４時３２分