Roland RE-20 - Manual (Page 22)

22
Main Specifications
RE-20: Space Echo
Nominal Input Level
-20 dBu (INPUT VOLUME knob: center),
max +4 dBu
Input Impedance
1 M Ω
Nominal Output Level
-20 dBu
Output Impedance
1 k Ω
Recommended Load Impedance
10 k Ω or greater
Display
Virtual Tape Display
Controls
EFFECT ON/OFF pedal
TAP pedal
BASS knob
TREBLE knob
REVERB VOLUME knob
REPEAT RATE knob
INTENSITY knob
ECHO VOLUME knob
MODE SELECTOR knob
INPUT VOLUME knob
DIRECT switch
Indicators
POWER indicator
(serves also as battery check indicator)
PEAK LEVEL indicator
EFFECT ON/OFF indicator
TAP indicator
Connectors
INPUT jacks A/MONO, B (1/4 inch phone type)
OUTPUT jacks A/MONO, B (1/4 inch phone type)
EXP PEDAL jack (1/4 inch TRS phone type)
DC IN jack (DC 9 V)
Power Supply
DC 9 V: Dry battery LR6/R6 (AA) type x 6,
AC Adaptor (PSA series)
Current Draw
75 mA (9 V max.)
* Expected battery life under continuous use:
Carbon: 9 hours
Alkaline: 32 hours
These figures will vary depending on the
actual conditions of use.
Dimensions
173 (W) x 158 (D) x 57 (H) mm
6-13/16 (W) x 6-1/4 (D) x 2-1/4 (H) inches
Weight
1.2 kg / 2 lbs 11 oz (including batteries)
Accessories
Owner’s Manual
Leaflet (“USING THE UNIT SAFELY,”
“IMPORTANT NOTES,” and “Information”)
Dry battery R6 (AA) type (carbon) x 6
Options
AC Adaptor (PSA series)
Expression pedal (Roland EV-5)
* 0 dBu = 0.775 Vrms
* In the interest of product improvement, the
specifications and/or appearance of this unit are
subject to change without prior notice.
RE-20_e.book 22 ページ ２００７年６月８日 金曜日 午後４時３２分