Chapter 5, Selecting digital output type, 48 chapter 5 – RCA RC5400P User Manual
Page 52
Chapter 5
48
chapter 5
Selecting Digital Output Type
If you have a receiver with a digital signal input, use this feature to select your
player’s type of digital output.
OFF
No signal is output from the optical or coaxial port.
BITSTREAM
Select this option when the DVD player is connected with a
power amplifier through optical or coaxial port. The power amplifier
connected must have Dolby Digital, DTS and MPEG decoding.
PCM Select this option when the DVD player is connected with a 2-channel digital
or stereo amplifier.
1.
With no disc playing, press SETUP (the main menu appears).
2.
Use the arrow buttons to highlight the Display option. Press
(play/OK) to
select (The Display menu is displayed).
3.
Use the up/down arrow buttons to highlight the Digital Out option. The digital
output choices appear on the right.
4.
Press the right arrow button to move to the digital output choices. Use the up/
down arrow buttons to highlight the desired choice. When an option is
highlighted, the option description appears at the bottom of the screen.
5.
Press
(play/OK) to select the choice.
6.
Press the left arrow button to return to the Display menu options on the left.
To return to the main menu, highlight the Main Menu option and press
(play/OK). To exit the menu system completely, press SETUP.
IMAGE
STANDARD
ANGLE
LANGUAGE
DIGITAL OUT
SUBTITLE
MAIN MENU
DISPLAY MENU
OFF
BITSTREAM
PCM
SETUP DIGITAL OUT
The Display Menu with the Digital
Output option selected.