Roberts Radio Gemini 19 CRD-19 - Manual (Page 6)

5
Operating your clock radio
1. Press the Standby button to switch on your clock radio. The display
will show "Tuning" for a few seconds.
2. If the clock radio has been used before, the last used station will be
selected.
3. The fi rst station in the list of stations found will be played. The display
will show the station name in the fi rst line of the display and other
information in the second line.
4. If no signals are found "Signal N/A" will be displayed and it may be
necessary to relocate your clock radio to a position giving better
reception. You should then carry out an autoscan to fi nd stations as
described on page 8.
1