Roberts Radio Gemini 19 CRD-19 User Manual
Page 23
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
22
Line in socket (3.5mm Jack)
1. Connect a stereo or mono audio source (ie iPod, MP3 or CD player) to
the Auxiliary line in socket. Your clock radio display will show "Aux
in" and the backlight will be illuminated indicating that your radio is
switched on.
2. Adjust
the
Volume control on your iPod, MP3 or CD player for com-
fortable listening.
The Alarms will not operate while you have any connection to
the Line in socket.
Note: When you connect the audio source your clock radio will be
muted. You must adjust the volume on your iPod, MP3 or CD player
in order to play the sound through your clock radio speaker.
1
Fitting a telescopic aerial (not supplied)
If you have a weak reception in your area you may purchase a telescopic
aerial from our Techincal Services Department.
1. Gently pull out the wire pig tail aerial from the aerial socket located
on the rear of your clock radio.
2. Screw in the telescopic aerial into the aerial socket.
1