Roberts Radio Gemini 19 CRD-19 - Manual (Page 5)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
4
Using the clock radio for the fi rst time
Your clock radio is supplied with a Mains Adaptor.
1. Place your clock radio on a fl at surface.
2. Insert the adaptor plug into the DC socket located on the rear of your
clock radio.
3. Fully extend the wire aerial located on the rear of your clock radio. The
wire should be fully extended and positioned for optimum reception.
4. Plug the adaptor into a standard 13 amp mains socket outlet.
5. When your clock radio is fi rst switched on the display will show "DAB
Digital Radio" then "Clock setting" and a station search will be per-
formed automatically.
6. When stations have been found, the clock information will appear on
the display.
7. If no stations have been found "0 Services Found" then "Service N/A"
will be displayed. It may then be necessary to relocate your clock
radio to a position giving better reception. You should then carry out
an autoscan to fi nd stations as described on page 8.