Roberts Radio Gemini 19 CRD-19 User Manual

Page 14

Setting the alarm time

Your clock radio has two separate alarms which can be set to wake you
to either radio or beep type alarm. Each alarm can be set to sound once,
everyday, weekday or weekend. The alarms can be set with the radio in
the on or the off position. In the event of a power interruption your clock
radio has a built in memory chip that will maintain all your alarm settings
when the power is restored.

Note: If no buttons are pressed for 5 seconds the clock radio will
exit the alarm setup.

To exit the alarm menu at any time press the Alarm button.

1. Press

the

Standby button to switch on your clock radio.

2. Press and hold down the Alarm button for 2 seconds to enter the

alarm setup. "ALARM 1" will ﬂ ash on the display.

3. Press

the

Tuning up or down buttons to select the desired alarm 1

or 2.

4. Press

the

Menu/Select button to enter the alarm day option. If there

are no alarms set the display will show "OFF".

Once

- Will sound at one time only

Everyday

- Will sound everyday

Weekday

- Will sound only on weekdays

Weekend

- Will sound only on weekends

Off

- Will switch off the alarm permanently.

5. Press

the

Tuning up or down buttons to select the desired alarm

day option, once, everyday, weekday or weekend.