Regency P42-LP3 - Manual (Page 36)

Regency P42-3 Zero Clearance Direct Vent Gas Fireplace 36
INSTALLING VALVE
12) Hook up the gas line and check for gas
leaks with a soap and water solution or a
gas leak detector. (Do not use open flame
for leak testing.)
13) Fire up the unit.
14) Check the manifold pressure.
15) Reinstall the vermiculite, embers, rock-
wool and logs as needed.
16) Install and close the door and replace the
louvers.
MAINTENANCE
1) Attach the valve bracket to the valve with
the 4 (m5x8 metric) screws provided.
2) Reconnect the "gas out" 90 o elbow flare
fitting with an 11/16" wrench.
3) Reconnect the "gas out" flare nut with a
13/16" wrench.
4) Reconnect the quick drop out thermocouple
nut with a 9mm wrench.
5) Reconnect the pilot tube nut with a 7/16"
wrench.
6) Scrape off the old gasket from the floor of
the firebox.
7) Install a new gasket and reinstall the valve
assembly.
Note: Failure to install a new gasket may
severely affect the appliance per-
formance.
8) Reinstall the 12 hold down screws.
9) Hook up the 2 TP and 2 TH wires to the
appropriate connections on the valve.
10) Reinstall the burner grate. Put a dab of high
temperature silicone over the 3 screw holes.
11) Install Burner tube.