Roberts Gorden VANTAGE II CTH2-40 User Manual
Page 7

SECTION 1: H
EATER
S
AFETY
1
SECTION 1: HEATER SAFETY
Your Safety is Important to Us!
This symbol is used throughout 
the manual to notify you of possi-
ble fire, electrical or burn hazards. 
Please pay special attention when 
reading and following the 
warnings in these sections.
Installation, service and annual inspection of heater
must be done by a contractor qualified in the installa-
tion and service of gas-fired heating equipment.
Read this manual carefully before installation, opera-
tion or service of this equipment.
This heater is designed for heating nonresidential 
indoor spaces. Do not install in residential spaces. 
These instructions, the layout drawing, local codes 
and ordinances, and applicable standards that apply 
to gas piping, electrical wiring, venting, etc. must be 
thoroughly understood before proceeding with the 
installation.
Protective gear is to be worn during installation, 
operation and service. Thin sheet metal parts, 
including the aluminum reflector portion of the heater 
and the various venting components, have sharp 
edges. To prevent injury, the use of work gloves is 
recommended. The use of gloves will also prevent 
the transfer of body oils from the hands to the surface 
of the reflector.
Before installation, check that the local distribution 
conditions, nature of gas and pressure, and adjust-
ment of the appliance are compatible.
For additional copies of the Installation, Operation 
and Service Manual, please contact Roberts-Gordon 
LLC.
1.1 Manpower Requirements
To prevent personal injury and damage to the heater, 
two persons will be required for installation.
1.2 Safety Labels and Their Placement
Product safety signs or labels should be replaced by 
the product user when they are no longer are legible. 
Please contact Roberts-Gordon or your ROBERTS 
GORDON
®
independent distributor to obtain
replacement signs or labels. See Page 1, Figure 1 
through Page 2, Figure 2
.
FIGURE 1: Top and Bottom Panel Label Placement
Logo Label
Rating Plate Label
Bottom 
Panel
Top Panel
Gas Connection Label
Description
Part Number
Logo Label
91013200
Rating Plate Label
91010401
Gas Connection Label
91018122
