Runco CX-40HD - Manual (Page 60)

Maintenance and Troubleshooting
50 Runco CX-40HD/CX-46HD Owner’s Operating Manual
PRE
L
IMINAR
Y
Colors in the image are
swapped; for example, reds
appear blue or vice versa. • The Red/Pr, Green/Y or
Blue/Pb outputs from the
source are connected to
the wrong inputs on the
Crystal Series LCD
Display.
• Ensure that the source
outputs are connected to
the correct Crystal Series
LCD Display input.
RGB-HD images appear
“noisy.” • Clock and Phase settings
need adjustment.
• Manually adjust Clock and
Phase settings, or perform
an Auto-Adjust (refer to
PC
Mode Adjust on
page 38).
“Out of range” appears
on-screen. • The resolution and
frequency of the video
card in the computer are
not compatible with the
Crystal Series LCD
Display.
• Select a compatible
resolution and vertical
frequency (refer to
Computer Signal
Compatibility on
page 61).
The image is too large or too
small. • Image size needs
adjusting.
• Adjust the image size (refer
to PC Mode Adjust on
page 38).
Poor broadcast sound quality. • The sound quality of a
stereo broadcast may be
unstable in an area with a
weak signal.
• Use the MTS/SAP button
on the remote control to
select mono.
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution