Zanussi ZGL 643 ITX - Manual (Page 19)

Product description
Cooking surface layout
ZGL643IT
2
1
6
5
4
3
1 Semi-rapid burner
2 Semi-rapid burner
3 Control knobs
4 Spark generator button
5 Auxiliary burner
6 Rapid burner
ZGL683IT
2
1
6
5
4
3
1 Semi-rapid burner
2 Semi-rapid burner
3 Control knobs
4 Spark generator button
5 Auxiliary burner
6 Triple Crown burner
Control knobs
Symbol Description
no gas supply / off position
Symbol Description
maximum gas supply
minimum gas supply
Operation
Ignition of the burner
Warning! Be very careful when you use open fire in
kitchen environment. Manufacturer decline any
responsibility in case misuse of the flame
Always light the burner before you put cookware.
To light the burner:
1. Push and hold the spark generator button .
2. Turn the control knob counterclockwise to the maxi-
mum position .
3. Release the spark generator button but keep the con-
trol knob on this position for approximately 5 sec-
onds; this will let thermocouple to warm up. If not,
the gas supply will be interrupted.
4. Adjust the flame after it is regular.
If after some tries the burner does not light, check if
the crown and its cap are in correct positions.
19