Zanussi 6204 - Manual

ZANUSSI
P R O F E S S I O N A L
GAS PASTA COOKERS
N 700
178144
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 1
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 1 1
INCLUDED ACCESSORIES
Net weight - kg. 50 50
gas 10.5 21
Power - kW
Maximum Well Capacity -lt 18, 24.5 18, 24.5
height 300 300
depth 400 400
width 250 250
Usable well dimensions - mm
N° of wells 1 2
height adjustment 50 50
height 850 850
depth 700 700
width 400 800
External dimensions - mm
Power supply Gas Gas
KCPG400
178143
KCPG800
178144
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 700: a range of over 100 models
for the professional caterer designed
to guarantee the highest level of
performance, reliability, energy
saving, safety standards and
ergonomic operation. These
concepts are reflected in the total
modularity of the range that ensures
numerous configurations, either
free-standing or bridged. N 700
demonstrates how advanced
technology can satisfy the needs of
the professional caterer.
The models detailed on this sheet
are 2 gas pasta cookers: ½ and full
module.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
�
Worktop in 1,5mm stainless steel.
Front panel in stainless steel with
Scotch Brite finish.
�
Well in 316 AISI stainless steel
thus guaranteeing high resistence
against the water and salt corrosive
action.
�
Feet in stainless steel adjustable
in height 50mm.
� Easy to use control panel. with
gas cock, piezo ignition and water
tap.
�
High-power burners (one for each
well) with optimized combustion
positioned beneath the base of the
well, featuring flame failure device
and pilot light with separate power
settings for each well.
�
Skimming zone for collecting and
discharging, through the overflow
filter, of starches and foams.
�
All models have right-angled side
edges to allow flush fitting joins
between units.
�
IPX4 water protection.
�
Ease of maintenance guaranteed
by frontal access to all working
components.
�
Main connections can be via the
rear or the base of the unit.
�
All appliances are supplied for use
with natural gas or LPG. Conversion
jets supplied as standard.
*In accordance with H regulations for gas models
belonging to Class B11 (power over 14 kW), it is
necessary to install a chimney (if installed under a
hood) or chimney and draft diverter if the waste gases
are vented directly outside