Roland F-120 - Manual (Page 15)

15
D
eu
tsc
h
En
gli
sh
Fra
nç
ais
Italiano
Español
Por
tug
uês
N
eder
lands
& & Restoring the Settings to the Factory Condition (Factory Reset)
The settings you’ve changed in Function mode can be restored to
their factory-set condition. This operation is called “Factory Reset.”
NOTE!
The “Factory Reset” operation will erase all settings stored by the
Memory Backup function, as well as all songs you’ve recorded in
internal memory.
1.
While holding down the [Key Touch] button and the [Twin
Piano] button, turn on the power .
The display will indicate “ Sur ” (Sure?), and the [–] button and [+]
button will blink.
If you decide not to execute the Factory Reset operation, press the
[–] button.
2.
To execute the Factory Reset, press the [+] button .
When the Factory Reset has been completed, the display will
indicate “
End .”
* Never turn off the power before the display indicates “ End .”
3.
Press the [Power] switch to turn the power off, then on
again .
With the factory settings, the unit’s power will automatically
be switched off 240 minutes (4 hours) after you stop playing or
operating the unit.
If you don’t want the power to turn off automatically, change the
“Auto Off” setting to “OFF” as follows.
1.
Hold down the [Key Touch] button and press the [Twin
Piano] button .
The display will indicate “ F01 ” (or F02 – F08 ); the unit is now in
Function mode.
2.
Press the [–] [+] buttons to select “F07 .”
3.
Press the [Metronome] button .
4.
Press the [–] [+] buttons to select the Auto Off setting .
If you don’t want the power to turn off automatically,
choose “OFF .”
Value Explanation
240 (default)
The power will automatically turn off when 240 minutes
(4 hours) have passed since you last played or operated
the unit.
OFF The power will not turn off automatically.
5.
Press the [Key Touch] button or the [Twin Piano] button to
exit Function mode .
MEMO
This setting is remembered even after the power is turned off.
& & Making the Power Automatically Turn Off After a Time (Auto Off)