Using the headphones, Connecting the headphones, Using the headphone hook – Roland Digital Piano LX-10F User Manual

Page 18: Connecting the headphones using the headphone hook, Here you can connect headphones (p. 18

Before You Play

You can use headphones to enjoy the LX-10F without disturbing those around you, such as at night.

Connecting the Headphones

The LX-10F has two headphone jacks, two people can also

use headphones simultaneously.

Plug the headphones into the Phones jack.

If headphones are connected, no sound will be output

from the LX-10F’s speakers.

Use the LX-10F’s [Volume] slider to adjust the

headphone volume (P.17).

If headphones are connected, a headphone symbol is shown

in the lower left of the screen.

Using the Headphone Hook

Whenever you are not using the headphones, you can hang

them on the headphone hook of the LX-10F.

Attaching the Headphone Hook

Press and twist the headphone hook included with

the LX-10F into the hole in the bottom left of the

LX-10F (refer to the figure above).

Turn the headphone hook wing nut to secure the

headphone hook.

Do not hang anything other than headphones on the

headphone hook. Doing so may damage the

instrument or the hook.

Cautions when Using Headphones

•

To prevent damage to the cord’s internal conductors, avoid

rough handling. When using headphones, mainly try to

handle either the plug or the headset.

•

Your headphones may be damaged if the volume of a device

is already turned up when you plug them in. Minimize the

volume before you plug in the headphones.

•

Excessive input will not only damage your hearing, but may

also strain the headphones. Please enjoy music at an

appropriate volume.

•

Use headphones that have a stereo 1/4” phone plug.

Using the Headphones

Headphone hook

Wing nut

LX-10F_e.book 18 ページ２０１０年１月１４日　木曜日　午後１０時４５分