Radio Shack ET-545 - Manual (Page 17)

17
CALLER ID OPERATION
If you subscribe to Caller ID, the sys-
tem automatically displays information
about calls you receive and stores the
information in Caller ID memory. The
system can store up to 100 number
only or name and number call records.
The first line of the Caller ID record
shows the time, date, and the number
of the call. The second line shows the
phone number of the caller and other
information about the call (see “Caller
ID Displays”). The third line shows the
name (if available) of the caller and
other information about the call.
Notes:
• If POWER is set to OFF or you are
using the phone, the phone does
not receive Caller ID information.
• If you are programming the sys-
tem when a call is received, the
phone automatically exits pro-
gramming and shows Caller ID
information.
CALLER ID DISPLAYS
NEW
Indicates a new call.
REPT
Indicates a repeat call.
Note: NEW and REPT do not appear
again after you review the display in-
formation.
CALL FOWRD BUSY
Appears instead of the phone
number if the call was forwarded
to you by a phone that was set to
forward any busy calls.
CAL FWRD NO ANS
Appears instead of the phone
number if the call was forwarded
to you by a phone that was set to
forward an unanswered call.
CAL FWRD UNIVSL
Appears instead of the phone
number if the call was forwarded
to you by a phone that was set to
forward all calls.
CALL #(XX)
Shows the number of calls stored
in Caller ID memory and in the
VIP Call List. (The highest number
is the most recent call.)
Note: If there are 100 calls in Call-
er ID memory, the oldest call is
#00 and the most recent call is
#99.
CALLER ID ERROR
Appears if the incoming Caller ID
information has data errors.
MESSAGE WAITING
Appears if you subscribe to your
phone company’s message ser-
vice and a message is waiting.
43-1045.fm Page 17 Tuesday, August 17, 1999 10:58 AM