Radio Shack ET-545 User Manual
Page 13
13
Note: The handset will not beep dur-
ing a call.
MEMORY DIALING
You can store up to 30 phone num-
bers and associated names for quick
and easy dialing. Each stored number
can be up to 16 digits long, and each
name can be up to 15 characters.
Notes:
• If
TONE/PULSE
is set to
PULSE
and you want to use tone dialing
for a memory number, you must
store the tone entry (
TONE
) as the
first entry of the number you want
to tone dial.
• Do not store a number with both
pulse and tone entries in the same
memory location. This could result
in a wrong number being dialed.
• To keep your accounts secure, we
recommend you do not store your
personal access code for services
such as bank-by-phone in a mem-
ory location.
Storing a Name and Number
in Memory
1. With
POWER
set to
ON
, press
MEMORY
. The keypad lights and
MEMO #00
appears on the dis-
play.
Note: If you do not press any but-
ton on the keypad within about 25
seconds, the keypad light turns off
and the handset sounds 3 beeps.
You must press
MEMORY
again so
the keypad lights before you can
store the telephone number.
2. Press
ENTER
.
ENTER
NAME
appears on the display.
3. Use the keypad to enter charac-
ters and spaces.
Note: To store the phone number
without entering a name, skip this
step.
To enter each letter or space, you
need to press two number keys.
To enter a letter, press a number
key (1 to 9) or
for the letter’s
group. Then press
1
,
2
, or
3
to
select the desired letter. For
example, to enter JEN: Press
5
,
then press
1
;
J
appears. Then,
press
3
then
2
;
E
appears. Finally,
press
6
then
2
;
N
appears.
• To enter a left parenthesis,
press
0
then
1
.
• To enter a right parenthesis,
press
0
then
2
.
illus
43-1045.fm Page 13 Tuesday, August 17, 1999 10:58 AM