Figure 3-18 . connecting 12-volt trigger outputs, 18. connecting 12-volt trigger outputs, Pre l iminar y – Runco VIDEOXTREME VX-8D User Manual

Page 53

Text mode
Original mode

Runco VX-8d Installation/Operation Manual

PRE

IMINAR

Connecting 12-volt
Trigger Outputs to
External Equipment

If your VX-8d is equipped with a CineWide with AutoScope system, connect the
AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see Figure 3-18.

Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.

Figure 3-18. Connecting 12-volt Trigger Outputs

Tip = +12V

Sleeve = Ground

AutoScope Lens Motor

3.5-mm
mini plug

AC Input

Power

Switch

Retractable Screen or other
12-volt trigger-activated
device