4 dhd controller rear panel, Figure 2-4 . dhd controller rear panel, Outputs – Runco VIDEOXTREME VX-8D User Manual
Page 25: Dhd controller rear panel, 4. dhd controller rear panel, Pre l iminar y
Runco VX-8d Installation/Operation Manual
9
PRE
L
IMINAR
Y
7.
RIGHT BUTTON
Used to direct-select inputs or move the menu cursor right in the OSD. When no
menus are present on-screen, the RIGHT button toggles through the different
sources, in this order:
Composite Video - S-Video 1 - S-Video 2 - Component - HD 1 - HD 2 - SCART -
HDMI 1 - HDMI 2
8.
MENU BUTTON
Press the MENU button to bring up the main menu, or to exit the current menu and
return to the previous one.
9.
UP BUTTON
Use to direct-select aspect ratios or move the menu cursor up in the OSD. When no
menus are present on-screen, the UP button toggles through aspect ratios in the
following order:
Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9
10. ENTER BUTTON
When an item is highlighted on the OSD, the ENTER button selects the item.
11. STANDBY LED
Lights amber when the DHD Controller is in standby mode; otherwise it is off.
2.4
DHD Controller Rear
Panel
Figure 2-4 shows the rear connector panel on the DHD Controller.
Figure 2-4. DHD Controller Rear Panel
Outputs
1.
HDMI Out
Connect this to the DHD Input on the VX-8d (see Figure 2-2).
2.
Display Control
Connect this to the RS-232 input on the VX-8d, using the provided communication
cable.
3.
TRIGGERS
Connection for up to three (3), 12-volt trigger-controlled devices such as retractable
screens, screen masks or a CineWide with AutoScope system. Output current is
limited to 250 milliamperes (mA).
1
5
6
4
14
2
3
10
11
7
8
9
12
13