Riverstone Networks RS 2100 User Manual

Page 64

5-2 Riverstone Networks RS 2100 Getting Started Guide

Upgrading System Image Software

Managing RS 2100 Software

Note

The is the full directory path and filename to the image
software file on the TFTP server.

Here is an example:

Enter the

system image list

command to list the images on the internal flash memory and verify

that the new image is present:

Here is an example:

Use the

system image choose

command to select the image file that the RS 2100 will use when

rebooted.

Here is an example:

Use the

system image list

command to verify the change.

system image add

rs# system image add 134.152.178.5 tftpboot/rs7300

Downloading image 'tftpboot/rs7300' from host '134.152.178.5'

to local image rs7300 (takes a while) . . .

download: done

save:

kernel: 100%

done

Image checksum validated.

%SYS-I-BOOTADDED, Image 'rs7300' added.

rs#

system image list

Images currently available on Master CM

slot0:

rs7300 (version 7.3.0.0)

rs7000 (version 7.0.0.0) [selected for next boot]

rs#

system image choose rs7300

Found image in slot0

Making image rs7300 (version 7.3.0.0) the active image

for next reboot on Master CM . . .

%SYS-I-CHS_PRIMARY_OK, image successfully chosen on Primary CM

rs#