Riverstone Networks RS 2100 - Manual (Page 54)

4-14 Riverstone Networks RS 2100 Switch Router Getting Started Guide
Setting Up Passwords RS 2100 Initial Configuration
5. When the RS 2100 finishes booting, enter the following commands (when prompted, answer
yes
):
6. Both the User access mode and Enable access mode passwords are now reset to the default “blank”
values.
7. Enter new passwords for both the User and Enable access modes.
rs> enable
rs# copy startup to scratchpad
rs# config
rs(config)# system set password login none
rs(config)# system set password enable none
rs(config)# save startup
Are you sure you want to overwrite the Startup configuration [no]? yes
There are non-committed configuration changes. Do you want to make
these changes active and then save everything to Startup [yes]? yes
%CONFIG-I-SAVED, 2001-10-02 21:53:54 %GATED-I-RECONFIGDONE, Routing
configuration changes completed (pid 0x809eab20).
configuration saved to Startup configuration.
rs(config)#