Riverstone Networks RS 2100 - Manual (Page 61)

Riverstone Networks RS 2100 Switch Router Getting Started Guide 4-21
RS 2100 Initial Configuration Setting the SYSLOG Parameters
Note The is a string of the form: user, kern, or local0 through local7.
These strings are reserved by the SYSLOG server daemon. for information on
how is used by the SYSLOG server, see the documentation for
your server’s syslog.conf file.
Here is an example:
5. To activate the SYSLOG commands, use the
save active
command. Enter
yes
to activate the
changes.
rs# config
rs(config)# system set syslog server 16.50.11.12
rs(config)# system set syslog level info
rs(config)# system set syslog facility local0