Radio Shack ET-919 - Manual (Page 15)

15
Press MUTE during the call. The MUTE
indicator on the handset lights steadily.
Press MUTE again to resume your
phone conversation. The MUTE indica-
tor turns off.
SETTING THE HANDSET’S
VOLUME
You can select one of three different vol-
ume settings (soft, normal, loud) using
VOLUME s or t during a call.
1. Lift the handset and press TALK .
The TALK indicator lights.
2. Repeatedly press VOLUME s to
increase the volume level or VOL-
UME t to decrease it.
Note: Every time you press VOL-
UME s or t, the ET-919 beeps,
except when it is already at the loud-
est or softest volume level.
USING REDIAL
To quickly redial the last number dialed,
press
TALK . Then when you hear the
dial tone, simply press REDIAL .
Notes:
• The redial memory holds up to 16
digits, so you can redial long-
distance as well as local numbers.
• The redial memory also holds pause
entries. See “Entering a Pause” on
Page 17.
• The redial memory does not store a
flash entry or any digits you press
after
FLASH (see “Using Flash”).
USING FLASH
FLASH performs the electronic equiva-
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
M UTE
Indicator
43-1089.fm Page 15 Tuesday, August 17, 1999 3:24 PM