Radio Shack ET-919 - Manual (Page 10)

10
4. Insert the supplied AC adapter’s
barrel plug into the DC 12V jack on
the back of the base. Route the
adapter’s cord through the right slot
on the bottom of the base.
5. Insert the tabs on the narrow end of
the bracket into the upper slots on
the bottom of the base, guide the
modular and adapter cords through
the cord slots on the bracket, and
push the tabs on the wide end of the
bracket into the slots on the bottom
of the base.
6. Align the keyhole slots with the
mounting screws and slide the base
downward to secure it.
7. Plug the modular cord into a modu-
lar phone line jack.
8. Plug the adapter into a standard AC
outlet.
9. Lift the base’s antenna to a vertical
position.
DC 12V Jack
43-1089.fm Page 10 Tuesday, August 17, 1999 3:24 PM